General Tab

• Engines: Enables connection to each Viz Engine. Viz Mosart supports five graphics engine connections when checked.

  • Host: Hostname or IP address to Viz Engine.

    Note: A port other than the default (6100) should be added as an appendix to the host. For example: 127.0.0.1:6101 and not to the Port field.

Mirroring
You can add multiple Vizrt Viz Engines to any of the five graphics connections.

- Separate the engine name with a comma (,).
For example: engine1:port1, engine2:port2, engine3:port3

• • Port: PDB only: Port to communicate with the Viz Engine. Default: 6100.

  • Handler name: Media Sequencer only: Internal Media Sequencer handler name.

  • MSE Host: Media Sequencer only: Hostname or IP address to the machine running the Media Sequencer.

    Note: For Media Sequencer, both Handler name and MSE Host must be specified.

    You can define a backup MSE here by adding a second IP after a ";"

  • Encoding: Font encoding for the Viz Engine. Default: UTF-8.

  • Clicked Preview: Enables the “click on full screen graphic element” to be taken on the preview engine.

  • Auto Preview: Enable to automatically take all full screen graphic elements in the preview engine.

  • Preview engine: The number of the Viz Engine that is selected to be the preview engine.

• Database

  • Configure MSE database settings: Enable to update the database settings in the Media Sequencer with the details below.

  • User: Username on the Oracle database. Default: pilot.

  • Password: Password on the Oracle database. Default: pilot.

  • Datasource: TNS name or connection string of the Oracle database. Default: vizrtdb.

  • Schema: Oracle database schema for the Viz Pilot connection. Default: PILOT.

• Viz Content Pilot

  • Connect to VCP client host (check-box):
    When checked, enables playout of Viz Pilot elements directly through a Viz Pilot client .
    Use of Viz Pilot must be assigned for each template, and the special Viz Pilot macros mosart_load, mosart_start and mosart_continue must exist in Viz Pilot.
    Please refer to the ‘Shows’ fields in the Engines Setup Tab.

    Note: The "Display name" of both configurations must be exactly the same

  • Host: Hostname or IP address to the Viz Pilot client.

  • Port: Port to connect to the Viz Pilot macro port.

• Miscellaneous

  • Mos Playlist: Playlist in VCP that is populated through the Vizrt MOS gateway. Default: NEWS.ON-AIR-NEWS

    Info: The playlist name used here cannot be the same as that used in Trio Interface > Engines Setup Tab > Playlist > Playlist name.

  • Path Externals: Internal Media Sequencer path to the location for handling database elements. Default: external/pilotdb/elements

  • Local Media Sequencer Engine: Path to the launcher.exe in the Media Sequencer program files folder (only if Media Sequencer is running as a console application on the same machine).

  • Start MSE if not running: If checked and the Media Sequencer is not running, then AV Automation will try to execute it from the location given below.

  • Use Concept Override: If the full screen graphics concept should change when a new Graphics Profile is selected, this is configured here. Check to enable the Vizrt Concept Override if your scenes are prepared for this. Requires Viz Pilot 5.2 or later.

  • Translate Cue for Transition Logic elements: Only applicable when using Transition Logic full screen graphics as the Media Sequnecer ignores a normal cue command for these items.

    • No translate: Send cue command to the Media Sequencer (on Media Sequencer versions below 1.20 no cue will be performed).

    • Take: Use a take command when cuing.

    • Take out: Use a take out command when cuing.

  • Take out full screen graphics: Check to take out full screen graphics. By default, Viz Mosart will not do a takeout for full screen graphics.

  • Apply Channel Name to Elements: This will send the Channel name to be displayed with the graphic elements in the GUI.

Show Tab