Viz Mosart Administrator Guide

Version 5.1 | Published January 19, 2023 ©

GPIO Sample XML Config

Working configuration from Viz Mosart Lab in Bergen, October 2014
<?xml version="1.0" encoding="ISO-8859-1"?>
<!--
V2.30, Aug 1 2013, 12:55:23
-->
<io-Digital12x12.3>
<Config>
<Device>
<Text>
<DeviceName>WEBIO-<wut1></DeviceName>
<DeviceText> From the terminal block directly to the network </DeviceText>
<Location></Location>
<Contact></Contact>
</Text>
<Time_Date>
<TimeZone>
<UTCoffset>01:00</UTCoffset>
<Enable>
<Apply_Time_Zone>ON</Apply_Time_Zone>
</Enable>
<Summertime>
<UTCoffset>02:00</UTCoffset>
<Enable>
<Apply_Summertime>ON</Apply_Summertime>
</Enable>
<Start>
<Month>
<January>OFF</January>
<February>OFF</February>
<March>ON</March>
<April>OFF</April>
<May>OFF</May>
<June>OFF</June>
<July>OFF</July>
<August>OFF</August>
<September>OFF</September>
<October>OFF</October>
<November>OFF</November>
<December>OFF</December>
</Month>
<Mode>
<first>OFF</first>
<second>OFF</second>
<third>OFF</third>
<fourth>OFF</fourth>
<last>ON</last>
</Mode>
<Weekday>
<Sunday>ON</Sunday>
<Monday>OFF</Monday>
<Tuesday>OFF</Tuesday>
<Wednesday>OFF</Wednesday>
<Thursday>OFF</Thursday>
<Friday>OFF</Friday>
<Saturday>OFF</Saturday>
</Weekday>
<Time>02:00</Time>
</Start>
<Stop>
<Month>
<January>OFF</January>
<February>OFF</February>
<March>OFF</March>
<April>OFF</April>
<May>OFF</May>
<June>OFF</June>
<July>OFF</July>
<August>OFF</August>
<September>OFF</September>
<October>ON</October>
<November>OFF</November>
<December>OFF</December>
</Month>
<Mode>
<first>OFF</first>
<second>OFF</second>
<third>OFF</third>
<fourth>OFF</fourth>
<last>ON</last>
</Mode>
<Weekday>
<Sunday>ON</Sunday>
<Monday>OFF</Monday>
<Tuesday>OFF</Tuesday>
<Wednesday>OFF</Wednesday>
<Thursday>OFF</Thursday>
<Friday>OFF</Friday>
<Saturday>OFF</Saturday>
</Weekday>
<Time>03:00</Time>
</Stop>
</Summertime>
</TimeZone>
<TimeServer>
<UTCServer1>de.pool.ntp.org</UTCServer1>
<UTCServer2>europe.pool.ntp.org</UTCServer2>
<SyncTime>0</SyncTime>
<Enable>
<Apply_TimeServer>OFF</Apply_TimeServer>
</Enable>
</TimeServer>
<DeviceClock>
<Time>15:56</Time>
<Day>01</Day>
<Month>01</Month>
<Year>2004</Year>
</DeviceClock>
</Time_Date>
<BasicSettings>
<Network>
<IP_Addr>10.211.114.124</IP_Addr>
<Subnet_Mask>255.255.255.00</Subnet_Mask>
<Gateway>10.211.114.01</Gateway>
<BOOTPClient>
<STATIC>ON</STATIC>
<BOOTP_enable>OFF</BOOTP_enable>
<DHCP_enable>OFF</DHCP_enable>
</BOOTPClient>
<DnsServer1></DnsServer1>
<DnsServer2></DnsServer2>
<KeepAliveTime>00</KeepAliveTime>
</Network>
<HTTP_Set>
<Startup>
<index.htm>ON</index.htm>
<home.htm>OFF</home.htm>
<user.htm>OFF</user.htm>
</Startup>
<Enable>
<GET_Header_enable>OFF</GET_Header_enable>
<GET_HTTP_enable>OFF</GET_HTTP_enable>
</Enable>
<_HTTP_Port>80</_HTTP_Port>
<InputTrigger>
<Input_0>ON</Input_0>
<Input_1>ON</Input_1>
<Input_2>ON</Input_2>
<Input_3>ON</Input_3>
<Input_4>ON</Input_4>
<Input_5>ON</Input_5>
<Input_6>ON</Input_6>
<Input_7>ON</Input_7>
<Input_8>ON</Input_8>
<Input_9>ON</Input_9>
<Input_10>ON</Input_10>
<Input_11>ON</Input_11>
</InputTrigger>
</HTTP_Set>
<HTTP_Client>
<HTTP_Client>
<HTTP_Client_enable>OFF</HTTP_Client_enable>
</HTTP_Client>
<Enable>
<GET_Header_enable>OFF</GET_Header_enable>
<GET_HTTP_enable>OFF</GET_HTTP_enable>
</Enable>
<LocalPort>AUTO</LocalPort>
<ServerPort></ServerPort>
<Server_IP_Addr></Server_IP_Addr>
<ServerUrl></ServerUrl>
<InactiveTimeout></InactiveTimeout>
<InputTrigger>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputTrigger>
<Timer_Cron></Timer_Cron>
</HTTP_Client>
<Mail>
<Name>Web-IO 12xDigital</Name>
<ReplyAddr>Web-IO@no.reply</ReplyAddr>
<MailServer></MailServer>
<Authentication>
<_SMTP_authentication_off>ON</_SMTP_authentication_off>
<_ESMTP>OFF</_ESMTP>
<_SMTP_after_POP3>OFF</_SMTP_after_POP3>
</Authentication>
<User></User>
<Password></Password>
<POP3_Server></POP3_Server>
<Enable>
<Mail_enable>OFF</Mail_enable>
</Enable>
</Mail>
<SNMP>
<Community_String_Read></Community_String_Read>
<Community_String_Read_Write></Community_String_Read_Write>
<Manager_IP></Manager_IP>
<SystemTraps>
<Cold_Start>OFF</Cold_Start>
<Warm_Start>OFF</Warm_Start>
<Diag_Messages>OFF</Diag_Messages>
</SystemTraps>
<Enable>
<SNMP_enable>ON</SNMP_enable>
</Enable>
</SNMP>
<UDP>
<Port>42279</Port>
<RemotePort></RemotePort>
<Enable>
<UDP_enable>OFF</UDP_enable>
</Enable>
</UDP>
<Syslog>
<SyslogServerIP></SyslogServerIP>
<SyslogServerPort>514</SyslogServerPort>
<SystemMessages>
<Cold_Start>OFF</Cold_Start>
<Warm_Start>OFF</Warm_Start>
<Diag_Messages>OFF</Diag_Messages>
</SystemMessages>
<Enable>
<System_Messages_enable>OFF</System_Messages_enable>
</Enable>
</Syslog>
<FTP>
<FtpServerIP></FtpServerIP>
<FtpControlPort>21</FtpControlPort>
<User></User>
<Password></Password>
<FtpAccount></FtpAccount>
<Options>
<PASV>OFF</PASV>
</Options>
<Enable>
<FTP_enable>OFF</FTP_enable>
</Enable>
</FTP>
<Binary1>
<OperationMode>
<TCP_Server>ON</TCP_Server>
<TCP_Client>OFF</TCP_Client>
<UDP_Peer>OFF</UDP_Peer>
</OperationMode>
<Enable>
<Enable_BINARY_1>ON</Enable_BINARY_1>
</Enable>
<TcpServer1>
<LocalPort>49153</LocalPort>
<Client_HTTP_Port>80</Client_HTTP_Port>
<InputTrigger>
<Input_0>ON</Input_0>
<Input_1>ON</Input_1>
<Input_2>ON</Input_2>
<Input_3>ON</Input_3>
<Input_4>ON</Input_4>
<Input_5>ON</Input_5>
<Input_6>ON</Input_6>
<Input_7>ON</Input_7>
<Input_8>ON</Input_8>
<Input_9>ON</Input_9>
<Input_10>ON</Input_10>
<Input_11>ON</Input_11>
</InputTrigger>
<ApplicationMode1>
<Socket_device>ON</Socket_device>
<Compatible_50xxx>OFF</Compatible_50xxx>
<Box2Box_Slave>OFF</Box2Box_Slave>
<OPC_Device>OFF</OPC_Device>
</ApplicationMode1>
</TcpServer1>
<TcpClient1>
<LocalPort>AUTO</LocalPort>
<ServerPort>49153</ServerPort>
<Server_HTTP_Port>80</Server_HTTP_Port>
<Server_IP_Addr></Server_IP_Addr>
<ServerPassword></ServerPassword>
<InactiveTimeout>30</InactiveTimeout>
<InputTrigger>
<Input_0>ON</Input_0>
<Input_1>ON</Input_1>
<Input_2>ON</Input_2>
<Input_3>ON</Input_3>
<Input_4>ON</Input_4>
<Input_5>ON</Input_5>
<Input_6>ON</Input_6>
<Input_7>ON</Input_7>
<Input_8>ON</Input_8>
<Input_9>ON</Input_9>
<Input_10>ON</Input_10>
<Input_11>ON</Input_11>
</InputTrigger>
<Interval></Interval>
<ApplicationMode2>
<Socket_device>ON</Socket_device>
<Compatible_50xxx>OFF</Compatible_50xxx>
<Box2Box_Master>OFF</Box2Box_Master>
<ILOface>OFF</ILOface>
</ApplicationMode2>
</TcpClient1>
<UdpPeer1>
<LocalPort>45889</LocalPort>
<RemotePort>45889</RemotePort>
<Remote_IP_Addr></Remote_IP_Addr>
<InputTrigger>
<Input_0>ON</Input_0>
<Input_1>ON</Input_1>
<Input_2>ON</Input_2>
<Input_3>ON</Input_3>
<Input_4>ON</Input_4>
<Input_5>ON</Input_5>
<Input_6>ON</Input_6>
<Input_7>ON</Input_7>
<Input_8>ON</Input_8>
<Input_9>ON</Input_9>
<Input_10>ON</Input_10>
<Input_11>ON</Input_11>
</InputTrigger>
<Interval></Interval>
<ApplicationMode3>
<Socket_device>ON</Socket_device>
<Compatible_50xxx>OFF</Compatible_50xxx>
</ApplicationMode3>
</UdpPeer1>
</Binary1>
<Binary2>
<OperationMode>
<TCP_Server>ON</TCP_Server>
<TCP_Client>OFF</TCP_Client>
<UDP_Peer>OFF</UDP_Peer>
</OperationMode>
<Enable>
<Enable_BINARY_2>ON</Enable_BINARY_2>
</Enable>
<TcpServer2>
<LocalPort>49154</LocalPort>
<Client_HTTP_Port>80</Client_HTTP_Port>
<InputTrigger>
<Input_0>ON</Input_0>
<Input_1>ON</Input_1>
<Input_2>ON</Input_2>
<Input_3>ON</Input_3>
<Input_4>ON</Input_4>
<Input_5>ON</Input_5>
<Input_6>ON</Input_6>
<Input_7>ON</Input_7>
<Input_8>ON</Input_8>
<Input_9>ON</Input_9>
<Input_10>ON</Input_10>
<Input_11>ON</Input_11>
</InputTrigger>
<ApplicationMode1>
<Socket_device>ON</Socket_device>
<Compatible_50xxx>OFF</Compatible_50xxx>
<Box2Box_Slave>OFF</Box2Box_Slave>
<OPC_Device>OFF</OPC_Device>
</ApplicationMode1>
</TcpServer2>
<TcpClient2>
<LocalPort>AUTO</LocalPort>
<ServerPort>49154</ServerPort>
<Server_HTTP_Port>80</Server_HTTP_Port>
<Server_IP_Addr></Server_IP_Addr>
<ServerPassword></ServerPassword>
<InactiveTimeout>30</InactiveTimeout>
<InputTrigger>
<Input_0>ON</Input_0>
<Input_1>ON</Input_1>
<Input_2>ON</Input_2>
<Input_3>ON</Input_3>
<Input_4>ON</Input_4>
<Input_5>ON</Input_5>
<Input_6>ON</Input_6>
<Input_7>ON</Input_7>
<Input_8>ON</Input_8>
<Input_9>ON</Input_9>
<Input_10>ON</Input_10>
<Input_11>ON</Input_11>
</InputTrigger>
<Interval></Interval>
<ApplicationMode2>
<Socket_device>ON</Socket_device>
<Compatible_50xxx>OFF</Compatible_50xxx>
<Box2Box_Master>OFF</Box2Box_Master>
<ILOface>OFF</ILOface>
</ApplicationMode2>
</TcpClient2>
<UdpPeer2>
<LocalPort>45890</LocalPort>
<RemotePort>45890</RemotePort>
<Remote_IP_Addr></Remote_IP_Addr>
<InputTrigger>
<Input_0>ON</Input_0>
<Input_1>ON</Input_1>
<Input_2>ON</Input_2>
<Input_3>ON</Input_3>
<Input_4>ON</Input_4>
<Input_5>ON</Input_5>
<Input_6>ON</Input_6>
<Input_7>ON</Input_7>
<Input_8>ON</Input_8>
<Input_9>ON</Input_9>
<Input_10>ON</Input_10>
<Input_11>ON</Input_11>
</InputTrigger>
<Interval></Interval>
<ApplicationMode3>
<Socket_device>ON</Socket_device>
<Compatible_50xxx>OFF</Compatible_50xxx>
</ApplicationMode3>
</UdpPeer2>
</Binary2>
</BasicSettings>
<OutputMode>
<Output0>
<_HTTP>ON</_HTTP>
<_UDP_ASCII>OFF</_UDP_ASCII>
<_SNMP>OFF</_SNMP>
<Binary_1>OFF</Binary_1>
<Binary_2>OFF</Binary_2>
<_Logic>OFF</_Logic>
</Output0>
<Output1>
<_HTTP>ON</_HTTP>
<_UDP_ASCII>OFF</_UDP_ASCII>
<_SNMP>OFF</_SNMP>
<Binary_1>OFF</Binary_1>
<Binary_2>OFF</Binary_2>
<_Logic>OFF</_Logic>
</Output1>
<Output2>
<_HTTP>ON</_HTTP>
<_UDP_ASCII>OFF</_UDP_ASCII>
<_SNMP>OFF</_SNMP>
<Binary_1>OFF</Binary_1>
<Binary_2>OFF</Binary_2>
<_Logic>OFF</_Logic>
</Output2>
<Output3>
<_HTTP>ON</_HTTP>
<_UDP_ASCII>OFF</_UDP_ASCII>
<_SNMP>OFF</_SNMP>
<Binary_1>OFF</Binary_1>
<Binary_2>OFF</Binary_2>
<_Logic>OFF</_Logic>
</Output3>
<Output4>
<_HTTP>ON</_HTTP>
<_UDP_ASCII>OFF</_UDP_ASCII>
<_SNMP>OFF</_SNMP>
<Binary_1>OFF</Binary_1>
<Binary_2>OFF</Binary_2>
<_Logic>OFF</_Logic>
</Output4>
<Output5>
<_HTTP>ON</_HTTP>
<_UDP_ASCII>OFF</_UDP_ASCII>
<_SNMP>OFF</_SNMP>
<Binary_1>OFF</Binary_1>
<Binary_2>OFF</Binary_2>
<_Logic>OFF</_Logic>
</Output5>
<Output6>
<_HTTP>OFF</_HTTP>
<_UDP_ASCII>OFF</_UDP_ASCII>
<_SNMP>OFF</_SNMP>
<Binary_1>ON</Binary_1>
<Binary_2>OFF</Binary_2>
<_Logic>OFF</_Logic>
</Output6>
<Output7>
<_HTTP>OFF</_HTTP>
<_UDP_ASCII>OFF</_UDP_ASCII>
<_SNMP>OFF</_SNMP>
<Binary_1>ON</Binary_1>
<Binary_2>OFF</Binary_2>
<_Logic>OFF</_Logic>
</Output7>
<Output8>
<_HTTP>OFF</_HTTP>
<_UDP_ASCII>OFF</_UDP_ASCII>
<_SNMP>OFF</_SNMP>
<Binary_1>ON</Binary_1>
<Binary_2>OFF</Binary_2>
<_Logic>OFF</_Logic>
</Output8>
<Output9>
<_HTTP>OFF</_HTTP>
<_UDP_ASCII>OFF</_UDP_ASCII>
<_SNMP>OFF</_SNMP>
<Binary_1>ON</Binary_1>
<Binary_2>OFF</Binary_2>
<_Logic>OFF</_Logic>
</Output9>
<Output10>
<_HTTP>OFF</_HTTP>
<_UDP_ASCII>OFF</_UDP_ASCII>
<_SNMP>OFF</_SNMP>
<Binary_1>ON</Binary_1>
<Binary_2>OFF</Binary_2>
<_Logic>OFF</_Logic>
</Output10>
<Output11>
<_HTTP>OFF</_HTTP>
<_UDP_ASCII>OFF</_UDP_ASCII>
<_SNMP>OFF</_SNMP>
<Binary_1>ON</Binary_1>
<Binary_2>OFF</Binary_2>
<_Logic>OFF</_Logic>
</Output11>
<Safety_Timeout></Safety_Timeout>
<Enable>
<Load_Control_enable>OFF</Load_Control_enable>
</Enable>
</OutputMode>
<Alarm>
<Alarm1>
<InputTrigger>
<Input_0><enable>OFF</enable><state>OFF</state></Input_0>
<Input_1><enable>OFF</enable><state>OFF</state></Input_1>
<Input_2><enable>OFF</enable><state>OFF</state></Input_2>
<Input_3><enable>OFF</enable><state>OFF</state></Input_3>
<Input_4><enable>OFF</enable><state>OFF</state></Input_4>
<Input_5><enable>OFF</enable><state>OFF</state></Input_5>
<Input_6><enable>OFF</enable><state>OFF</state></Input_6>
<Input_7><enable>OFF</enable><state>OFF</state></Input_7>
<Input_8><enable>OFF</enable><state>OFF</state></Input_8>
<Input_9><enable>OFF</enable><state>OFF</state></Input_9>
<Input_10><enable>OFF</enable><state>OFF</state></Input_10>
<Input_11><enable>OFF</enable><state>OFF</state></Input_11>
</InputTrigger>
<OutputTrigger>
<Output_0><enable>OFF</enable><state>OFF</state></Output_0>
<Output_1><enable>OFF</enable><state>OFF</state></Output_1>
<Output_2><enable>OFF</enable><state>OFF</state></Output_2>
<Output_3><enable>OFF</enable><state>OFF</state></Output_3>
<Output_4><enable>OFF</enable><state>OFF</state></Output_4>
<Output_5><enable>OFF</enable><state>OFF</state></Output_5>
<Output_6><enable>OFF</enable><state>OFF</state></Output_6>
<Output_7><enable>OFF</enable><state>OFF</state></Output_7>
<Output_8><enable>OFF</enable><state>OFF</state></Output_8>
<Output_9><enable>OFF</enable><state>OFF</state></Output_9>
<Output_10><enable>OFF</enable><state>OFF</state></Output_10>
<Output_11><enable>OFF</enable><state>OFF</state></Output_11>
</OutputTrigger>
<SystemTrigger>
<Load_Control>OFF</Load_Control>
<Interval_Timer>OFF</Interval_Timer>
<Cold_Start>OFF</Cold_Start>
<Warm_Start>OFF</Warm_Start>
</SystemTrigger>
<MaxCounterValue></MaxCounterValue>
<Interval></Interval>
<Timer_Cron></Timer_Cron>
<AlarmEnable>
<Mail_enable>OFF</Mail_enable>
<SNMP_Trap_enable>OFF</SNMP_Trap_enable>
<UDP_Client_enable>OFF</UDP_Client_enable>
<Send_special_alarm_to_pending_TCP_connections>OFF</Send_special_alarm_to_pending_TCP_connections>
<TCP_Client_enable>OFF</TCP_Client_enable>
<Syslog_Messages_enable>OFF</Syslog_Messages_enable>
<FTP_Client_enable>OFF</FTP_Client_enable>
</AlarmEnable>
<Mail>
<E-Mail-Addr></E-Mail-Addr>
<Subject></Subject>
<Mailtext></Mailtext>
<Alarm_clear_subject></Alarm_clear_subject>
<Alarm_clear_text></Alarm_clear_text>
</Mail>
<SNMP>
<Manager_IP></Manager_IP>
<TrapText></TrapText>
<Alarm_clear_text></Alarm_clear_text>
</SNMP>
<UDP>
<IP_Addr></IP_Addr>
<Port></Port>
<UdpText></UdpText>
<Alarm_clear_text></Alarm_clear_text>
</UDP>
<TCP>
<IP_Addr></IP_Addr>
<Port></Port>
<TcpText></TcpText>
<Alarm_clear_text></Alarm_clear_text>
</TCP>
<Syslog>
<IP_Addr></IP_Addr>
<Port>514</Port>
<SyslogText></SyslogText>
<Alarm_clear_text></Alarm_clear_text>
</Syslog>
<FTP>
<FtpLocalDataPort>AUTO</FtpLocalDataPort>
<FileName></FileName>
<FtpAlarmText></FtpAlarmText>
<Alarm_clear_text></Alarm_clear_text>
<Options>
<STORE>OFF</STORE>
<APPEND>ON</APPEND>
</Options>
</FTP>
</Alarm1>
<Alarm2>
<InputTrigger>
<Input_0><enable>OFF</enable><state>OFF</state></Input_0>
<Input_1><enable>OFF</enable><state>OFF</state></Input_1>
<Input_2><enable>OFF</enable><state>OFF</state></Input_2>
<Input_3><enable>OFF</enable><state>OFF</state></Input_3>
<Input_4><enable>OFF</enable><state>OFF</state></Input_4>
<Input_5><enable>OFF</enable><state>OFF</state></Input_5>
<Input_6><enable>OFF</enable><state>OFF</state></Input_6>
<Input_7><enable>OFF</enable><state>OFF</state></Input_7>
<Input_8><enable>OFF</enable><state>OFF</state></Input_8>
<Input_9><enable>OFF</enable><state>OFF</state></Input_9>
<Input_10><enable>OFF</enable><state>OFF</state></Input_10>
<Input_11><enable>OFF</enable><state>OFF</state></Input_11>
</InputTrigger>
<OutputTrigger>
<Output_0><enable>OFF</enable><state>OFF</state></Output_0>
<Output_1><enable>OFF</enable><state>OFF</state></Output_1>
<Output_2><enable>OFF</enable><state>OFF</state></Output_2>
<Output_3><enable>OFF</enable><state>OFF</state></Output_3>
<Output_4><enable>OFF</enable><state>OFF</state></Output_4>
<Output_5><enable>OFF</enable><state>OFF</state></Output_5>
<Output_6><enable>OFF</enable><state>OFF</state></Output_6>
<Output_7><enable>OFF</enable><state>OFF</state></Output_7>
<Output_8><enable>OFF</enable><state>OFF</state></Output_8>
<Output_9><enable>OFF</enable><state>OFF</state></Output_9>
<Output_10><enable>OFF</enable><state>OFF</state></Output_10>
<Output_11><enable>OFF</enable><state>OFF</state></Output_11>
</OutputTrigger>
<SystemTrigger>
<Load_Control>OFF</Load_Control>
<Interval_Timer>OFF</Interval_Timer>
<Cold_Start>OFF</Cold_Start>
<Warm_Start>OFF</Warm_Start>
</SystemTrigger>
<MaxCounterValue></MaxCounterValue>
<Interval></Interval>
<Timer_Cron></Timer_Cron>
<AlarmEnable>
<Mail_enable>OFF</Mail_enable>
<SNMP_Trap_enable>OFF</SNMP_Trap_enable>
<UDP_Client_enable>OFF</UDP_Client_enable>
<Send_special_alarm_to_pending_TCP_connections>OFF</Send_special_alarm_to_pending_TCP_connections>
<TCP_Client_enable>OFF</TCP_Client_enable>
<Syslog_Messages_enable>OFF</Syslog_Messages_enable>
<FTP_Client_enable>OFF</FTP_Client_enable>
</AlarmEnable>
<Mail>
<E-Mail-Addr></E-Mail-Addr>
<Subject></Subject>
<Mailtext></Mailtext>
<Alarm_clear_subject></Alarm_clear_subject>
<Alarm_clear_text></Alarm_clear_text>
</Mail>
<SNMP>
<Manager_IP></Manager_IP>
<TrapText></TrapText>
<Alarm_clear_text></Alarm_clear_text>
</SNMP>
<UDP>
<IP_Addr></IP_Addr>
<Port></Port>
<UdpText></UdpText>
<Alarm_clear_text></Alarm_clear_text>
</UDP>
<TCP>
<IP_Addr></IP_Addr>
<Port></Port>
<TcpText></TcpText>
<Alarm_clear_text></Alarm_clear_text>
</TCP>
<Syslog>
<IP_Addr></IP_Addr>
<Port>514</Port>
<SyslogText></SyslogText>
<Alarm_clear_text></Alarm_clear_text>
</Syslog>
<FTP>
<FtpLocalDataPort>AUTO</FtpLocalDataPort>
<FileName></FileName>
<FtpAlarmText></FtpAlarmText>
<Alarm_clear_text></Alarm_clear_text>
<Options>
<STORE>OFF</STORE>
<APPEND>ON</APPEND>
</Options>
</FTP>
</Alarm2>
<Alarm3>
<InputTrigger>
<Input_0><enable>OFF</enable><state>OFF</state></Input_0>
<Input_1><enable>OFF</enable><state>OFF</state></Input_1>
<Input_2><enable>OFF</enable><state>OFF</state></Input_2>
<Input_3><enable>OFF</enable><state>OFF</state></Input_3>
<Input_4><enable>OFF</enable><state>OFF</state></Input_4>
<Input_5><enable>OFF</enable><state>OFF</state></Input_5>
<Input_6><enable>OFF</enable><state>OFF</state></Input_6>
<Input_7><enable>OFF</enable><state>OFF</state></Input_7>
<Input_8><enable>OFF</enable><state>OFF</state></Input_8>
<Input_9><enable>OFF</enable><state>OFF</state></Input_9>
<Input_10><enable>OFF</enable><state>OFF</state></Input_10>
<Input_11><enable>OFF</enable><state>OFF</state></Input_11>
</InputTrigger>
<OutputTrigger>
<Output_0><enable>OFF</enable><state>OFF</state></Output_0>
<Output_1><enable>OFF</enable><state>OFF</state></Output_1>
<Output_2><enable>OFF</enable><state>OFF</state></Output_2>
<Output_3><enable>OFF</enable><state>OFF</state></Output_3>
<Output_4><enable>OFF</enable><state>OFF</state></Output_4>
<Output_5><enable>OFF</enable><state>OFF</state></Output_5>
<Output_6><enable>OFF</enable><state>OFF</state></Output_6>
<Output_7><enable>OFF</enable><state>OFF</state></Output_7>
<Output_8><enable>OFF</enable><state>OFF</state></Output_8>
<Output_9><enable>OFF</enable><state>OFF</state></Output_9>
<Output_10><enable>OFF</enable><state>OFF</state></Output_10>
<Output_11><enable>OFF</enable><state>OFF</state></Output_11>
</OutputTrigger>
<SystemTrigger>
<Load_Control>OFF</Load_Control>
<Interval_Timer>OFF</Interval_Timer>
<Cold_Start>OFF</Cold_Start>
<Warm_Start>OFF</Warm_Start>
</SystemTrigger>
<MaxCounterValue></MaxCounterValue>
<Interval></Interval>
<Timer_Cron></Timer_Cron>
<AlarmEnable>
<Mail_enable>OFF</Mail_enable>
<SNMP_Trap_enable>OFF</SNMP_Trap_enable>
<UDP_Client_enable>OFF</UDP_Client_enable>
<Send_special_alarm_to_pending_TCP_connections>OFF</Send_special_alarm_to_pending_TCP_connections>
<TCP_Client_enable>OFF</TCP_Client_enable>
<Syslog_Messages_enable>OFF</Syslog_Messages_enable>
<FTP_Client_enable>OFF</FTP_Client_enable>
</AlarmEnable>
<Mail>
<E-Mail-Addr></E-Mail-Addr>
<Subject></Subject>
<Mailtext></Mailtext>
<Alarm_clear_subject></Alarm_clear_subject>
<Alarm_clear_text></Alarm_clear_text>
</Mail>
<SNMP>
<Manager_IP></Manager_IP>
<TrapText></TrapText>
<Alarm_clear_text></Alarm_clear_text>
</SNMP>
<UDP>
<IP_Addr></IP_Addr>
<Port></Port>
<UdpText></UdpText>
<Alarm_clear_text></Alarm_clear_text>
</UDP>
<TCP>
<IP_Addr></IP_Addr>
<Port></Port>
<TcpText></TcpText>
<Alarm_clear_text></Alarm_clear_text>
</TCP>
<Syslog>
<IP_Addr></IP_Addr>
<Port>514</Port>
<SyslogText></SyslogText>
<Alarm_clear_text></Alarm_clear_text>
</Syslog>
<FTP>
<FtpLocalDataPort>AUTO</FtpLocalDataPort>
<FileName></FileName>
<FtpAlarmText></FtpAlarmText>
<Alarm_clear_text></Alarm_clear_text>
<Options>
<STORE>OFF</STORE>
<APPEND>ON</APPEND>
</Options>
</FTP>
</Alarm3>
<Alarm4>
<InputTrigger>
<Input_0><enable>OFF</enable><state>OFF</state></Input_0>
<Input_1><enable>OFF</enable><state>OFF</state></Input_1>
<Input_2><enable>OFF</enable><state>OFF</state></Input_2>
<Input_3><enable>OFF</enable><state>OFF</state></Input_3>
<Input_4><enable>OFF</enable><state>OFF</state></Input_4>
<Input_5><enable>OFF</enable><state>OFF</state></Input_5>
<Input_6><enable>OFF</enable><state>OFF</state></Input_6>
<Input_7><enable>OFF</enable><state>OFF</state></Input_7>
<Input_8><enable>OFF</enable><state>OFF</state></Input_8>
<Input_9><enable>OFF</enable><state>OFF</state></Input_9>
<Input_10><enable>OFF</enable><state>OFF</state></Input_10>
<Input_11><enable>OFF</enable><state>OFF</state></Input_11>
</InputTrigger>
<OutputTrigger>
<Output_0><enable>OFF</enable><state>OFF</state></Output_0>
<Output_1><enable>OFF</enable><state>OFF</state></Output_1>
<Output_2><enable>OFF</enable><state>OFF</state></Output_2>
<Output_3><enable>OFF</enable><state>OFF</state></Output_3>
<Output_4><enable>OFF</enable><state>OFF</state></Output_4>
<Output_5><enable>OFF</enable><state>OFF</state></Output_5>
<Output_6><enable>OFF</enable><state>OFF</state></Output_6>
<Output_7><enable>OFF</enable><state>OFF</state></Output_7>
<Output_8><enable>OFF</enable><state>OFF</state></Output_8>
<Output_9><enable>OFF</enable><state>OFF</state></Output_9>
<Output_10><enable>OFF</enable><state>OFF</state></Output_10>
<Output_11><enable>OFF</enable><state>OFF</state></Output_11>
</OutputTrigger>
<SystemTrigger>
<Load_Control>OFF</Load_Control>
<Interval_Timer>OFF</Interval_Timer>
<Cold_Start>OFF</Cold_Start>
<Warm_Start>OFF</Warm_Start>
</SystemTrigger>
<MaxCounterValue></MaxCounterValue>
<Interval></Interval>
<Timer_Cron></Timer_Cron>
<AlarmEnable>
<Mail_enable>OFF</Mail_enable>
<SNMP_Trap_enable>OFF</SNMP_Trap_enable>
<UDP_Client_enable>OFF</UDP_Client_enable>
<Send_special_alarm_to_pending_TCP_connections>OFF</Send_special_alarm_to_pending_TCP_connections>
<TCP_Client_enable>OFF</TCP_Client_enable>
<Syslog_Messages_enable>OFF</Syslog_Messages_enable>
<FTP_Client_enable>OFF</FTP_Client_enable>
</AlarmEnable>
<Mail>
<E-Mail-Addr></E-Mail-Addr>
<Subject></Subject>
<Mailtext></Mailtext>
<Alarm_clear_subject></Alarm_clear_subject>
<Alarm_clear_text></Alarm_clear_text>
</Mail>
<SNMP>
<Manager_IP></Manager_IP>
<TrapText></TrapText>
<Alarm_clear_text></Alarm_clear_text>
</SNMP>
<UDP>
<IP_Addr></IP_Addr>
<Port></Port>
<UdpText></UdpText>
<Alarm_clear_text></Alarm_clear_text>
</UDP>
<TCP>
<IP_Addr></IP_Addr>
<Port></Port>
<TcpText></TcpText>
<Alarm_clear_text></Alarm_clear_text>
</TCP>
<Syslog>
<IP_Addr></IP_Addr>
<Port>514</Port>
<SyslogText></SyslogText>
<Alarm_clear_text></Alarm_clear_text>
</Syslog>
<FTP>
<FtpLocalDataPort>AUTO</FtpLocalDataPort>
<FileName></FileName>
<FtpAlarmText></FtpAlarmText>
<Alarm_clear_text></Alarm_clear_text>
<Options>
<STORE>OFF</STORE>
<APPEND>ON</APPEND>
</Options>
</FTP>
</Alarm4>
<Alarm5>
<InputTrigger>
<Input_0><enable>OFF</enable><state>OFF</state></Input_0>
<Input_1><enable>OFF</enable><state>OFF</state></Input_1>
<Input_2><enable>OFF</enable><state>OFF</state></Input_2>
<Input_3><enable>OFF</enable><state>OFF</state></Input_3>
<Input_4><enable>OFF</enable><state>OFF</state></Input_4>
<Input_5><enable>OFF</enable><state>OFF</state></Input_5>
<Input_6><enable>OFF</enable><state>OFF</state></Input_6>
<Input_7><enable>OFF</enable><state>OFF</state></Input_7>
<Input_8><enable>OFF</enable><state>OFF</state></Input_8>
<Input_9><enable>OFF</enable><state>OFF</state></Input_9>
<Input_10><enable>OFF</enable><state>OFF</state></Input_10>
<Input_11><enable>OFF</enable><state>OFF</state></Input_11>
</InputTrigger>
<OutputTrigger>
<Output_0><enable>OFF</enable><state>OFF</state></Output_0>
<Output_1><enable>OFF</enable><state>OFF</state></Output_1>
<Output_2><enable>OFF</enable><state>OFF</state></Output_2>
<Output_3><enable>OFF</enable><state>OFF</state></Output_3>
<Output_4><enable>OFF</enable><state>OFF</state></Output_4>
<Output_5><enable>OFF</enable><state>OFF</state></Output_5>
<Output_6><enable>OFF</enable><state>OFF</state></Output_6>
<Output_7><enable>OFF</enable><state>OFF</state></Output_7>
<Output_8><enable>OFF</enable><state>OFF</state></Output_8>
<Output_9><enable>OFF</enable><state>OFF</state></Output_9>
<Output_10><enable>OFF</enable><state>OFF</state></Output_10>
<Output_11><enable>OFF</enable><state>OFF</state></Output_11>
</OutputTrigger>
<SystemTrigger>
<Load_Control>OFF</Load_Control>
<Interval_Timer>OFF</Interval_Timer>
<Cold_Start>OFF</Cold_Start>
<Warm_Start>OFF</Warm_Start>
</SystemTrigger>
<MaxCounterValue></MaxCounterValue>
<Interval></Interval>
<Timer_Cron></Timer_Cron>
<AlarmEnable>
<Mail_enable>OFF</Mail_enable>
<SNMP_Trap_enable>OFF</SNMP_Trap_enable>
<UDP_Client_enable>OFF</UDP_Client_enable>
<Send_special_alarm_to_pending_TCP_connections>OFF</Send_special_alarm_to_pending_TCP_connections>
<TCP_Client_enable>OFF</TCP_Client_enable>
<Syslog_Messages_enable>OFF</Syslog_Messages_enable>
<FTP_Client_enable>OFF</FTP_Client_enable>
</AlarmEnable>
<Mail>
<E-Mail-Addr></E-Mail-Addr>
<Subject></Subject>
<Mailtext></Mailtext>
<Alarm_clear_subject></Alarm_clear_subject>
<Alarm_clear_text></Alarm_clear_text>
</Mail>
<SNMP>
<Manager_IP></Manager_IP>
<TrapText></TrapText>
<Alarm_clear_text></Alarm_clear_text>
</SNMP>
<UDP>
<IP_Addr></IP_Addr>
<Port></Port>
<UdpText></UdpText>
<Alarm_clear_text></Alarm_clear_text>
</UDP>
<TCP>
<IP_Addr></IP_Addr>
<Port></Port>
<TcpText></TcpText>
<Alarm_clear_text></Alarm_clear_text>
</TCP>
<Syslog>
<IP_Addr></IP_Addr>
<Port>514</Port>
<SyslogText></SyslogText>
<Alarm_clear_text></Alarm_clear_text>
</Syslog>
<FTP>
<FtpLocalDataPort>AUTO</FtpLocalDataPort>
<FileName></FileName>
<FtpAlarmText></FtpAlarmText>
<Alarm_clear_text></Alarm_clear_text>
<Options>
<STORE>OFF</STORE>
<APPEND>ON</APPEND>
</Options>
</FTP>
</Alarm5>
<Alarm6>
<InputTrigger>
<Input_0><enable>OFF</enable><state>OFF</state></Input_0>
<Input_1><enable>OFF</enable><state>OFF</state></Input_1>
<Input_2><enable>OFF</enable><state>OFF</state></Input_2>
<Input_3><enable>OFF</enable><state>OFF</state></Input_3>
<Input_4><enable>OFF</enable><state>OFF</state></Input_4>
<Input_5><enable>OFF</enable><state>OFF</state></Input_5>
<Input_6><enable>OFF</enable><state>OFF</state></Input_6>
<Input_7><enable>OFF</enable><state>OFF</state></Input_7>
<Input_8><enable>OFF</enable><state>OFF</state></Input_8>
<Input_9><enable>OFF</enable><state>OFF</state></Input_9>
<Input_10><enable>OFF</enable><state>OFF</state></Input_10>
<Input_11><enable>OFF</enable><state>OFF</state></Input_11>
</InputTrigger>
<OutputTrigger>
<Output_0><enable>OFF</enable><state>OFF</state></Output_0>
<Output_1><enable>OFF</enable><state>OFF</state></Output_1>
<Output_2><enable>OFF</enable><state>OFF</state></Output_2>
<Output_3><enable>OFF</enable><state>OFF</state></Output_3>
<Output_4><enable>OFF</enable><state>OFF</state></Output_4>
<Output_5><enable>OFF</enable><state>OFF</state></Output_5>
<Output_6><enable>OFF</enable><state>OFF</state></Output_6>
<Output_7><enable>OFF</enable><state>OFF</state></Output_7>
<Output_8><enable>OFF</enable><state>OFF</state></Output_8>
<Output_9><enable>OFF</enable><state>OFF</state></Output_9>
<Output_10><enable>OFF</enable><state>OFF</state></Output_10>
<Output_11><enable>OFF</enable><state>OFF</state></Output_11>
</OutputTrigger>
<SystemTrigger>
<Load_Control>OFF</Load_Control>
<Interval_Timer>OFF</Interval_Timer>
<Cold_Start>OFF</Cold_Start>
<Warm_Start>OFF</Warm_Start>
</SystemTrigger>
<MaxCounterValue></MaxCounterValue>
<Interval></Interval>
<Timer_Cron></Timer_Cron>
<AlarmEnable>
<Mail_enable>OFF</Mail_enable>
<SNMP_Trap_enable>OFF</SNMP_Trap_enable>
<UDP_Client_enable>OFF</UDP_Client_enable>
<Send_special_alarm_to_pending_TCP_connections>OFF</Send_special_alarm_to_pending_TCP_connections>
<TCP_Client_enable>OFF</TCP_Client_enable>
<Syslog_Messages_enable>OFF</Syslog_Messages_enable>
<FTP_Client_enable>OFF</FTP_Client_enable>
</AlarmEnable>
<Mail>
<E-Mail-Addr></E-Mail-Addr>
<Subject></Subject>
<Mailtext></Mailtext>
<Alarm_clear_subject></Alarm_clear_subject>
<Alarm_clear_text></Alarm_clear_text>
</Mail>
<SNMP>
<Manager_IP></Manager_IP>
<TrapText></TrapText>
<Alarm_clear_text></Alarm_clear_text>
</SNMP>
<UDP>
<IP_Addr></IP_Addr>
<Port></Port>
<UdpText></UdpText>
<Alarm_clear_text></Alarm_clear_text>
</UDP>
<TCP>
<IP_Addr></IP_Addr>
<Port></Port>
<TcpText></TcpText>
<Alarm_clear_text></Alarm_clear_text>
</TCP>
<Syslog>
<IP_Addr></IP_Addr>
<Port>514</Port>
<SyslogText></SyslogText>
<Alarm_clear_text></Alarm_clear_text>
</Syslog>
<FTP>
<FtpLocalDataPort>AUTO</FtpLocalDataPort>
<FileName></FileName>
<FtpAlarmText></FtpAlarmText>
<Alarm_clear_text></Alarm_clear_text>
<Options>
<STORE>OFF</STORE>
<APPEND>ON</APPEND>
</Options>
</FTP>
</Alarm6>
<Alarm7>
<InputTrigger>
<Input_0><enable>OFF</enable><state>OFF</state></Input_0>
<Input_1><enable>OFF</enable><state>OFF</state></Input_1>
<Input_2><enable>OFF</enable><state>OFF</state></Input_2>
<Input_3><enable>OFF</enable><state>OFF</state></Input_3>
<Input_4><enable>OFF</enable><state>OFF</state></Input_4>
<Input_5><enable>OFF</enable><state>OFF</state></Input_5>
<Input_6><enable>OFF</enable><state>OFF</state></Input_6>
<Input_7><enable>OFF</enable><state>OFF</state></Input_7>
<Input_8><enable>OFF</enable><state>OFF</state></Input_8>
<Input_9><enable>OFF</enable><state>OFF</state></Input_9>
<Input_10><enable>OFF</enable><state>OFF</state></Input_10>
<Input_11><enable>OFF</enable><state>OFF</state></Input_11>
</InputTrigger>
<OutputTrigger>
<Output_0><enable>OFF</enable><state>OFF</state></Output_0>
<Output_1><enable>OFF</enable><state>OFF</state></Output_1>
<Output_2><enable>OFF</enable><state>OFF</state></Output_2>
<Output_3><enable>OFF</enable><state>OFF</state></Output_3>
<Output_4><enable>OFF</enable><state>OFF</state></Output_4>
<Output_5><enable>OFF</enable><state>OFF</state></Output_5>
<Output_6><enable>OFF</enable><state>OFF</state></Output_6>
<Output_7><enable>OFF</enable><state>OFF</state></Output_7>
<Output_8><enable>OFF</enable><state>OFF</state></Output_8>
<Output_9><enable>OFF</enable><state>OFF</state></Output_9>
<Output_10><enable>OFF</enable><state>OFF</state></Output_10>
<Output_11><enable>OFF</enable><state>OFF</state></Output_11>
</OutputTrigger>
<SystemTrigger>
<Load_Control>OFF</Load_Control>
<Interval_Timer>OFF</Interval_Timer>
<Cold_Start>OFF</Cold_Start>
<Warm_Start>OFF</Warm_Start>
</SystemTrigger>
<MaxCounterValue></MaxCounterValue>
<Interval></Interval>
<Timer_Cron></Timer_Cron>
<AlarmEnable>
<Mail_enable>OFF</Mail_enable>
<SNMP_Trap_enable>OFF</SNMP_Trap_enable>
<UDP_Client_enable>OFF</UDP_Client_enable>
<Send_special_alarm_to_pending_TCP_connections>OFF</Send_special_alarm_to_pending_TCP_connections>
<TCP_Client_enable>OFF</TCP_Client_enable>
<Syslog_Messages_enable>OFF</Syslog_Messages_enable>
<FTP_Client_enable>OFF</FTP_Client_enable>
</AlarmEnable>
<Mail>
<E-Mail-Addr></E-Mail-Addr>
<Subject></Subject>
<Mailtext></Mailtext>
<Alarm_clear_subject></Alarm_clear_subject>
<Alarm_clear_text></Alarm_clear_text>
</Mail>
<SNMP>
<Manager_IP></Manager_IP>
<TrapText></TrapText>
<Alarm_clear_text></Alarm_clear_text>
</SNMP>
<UDP>
<IP_Addr></IP_Addr>
<Port></Port>
<UdpText></UdpText>
<Alarm_clear_text></Alarm_clear_text>
</UDP>
<TCP>
<IP_Addr></IP_Addr>
<Port></Port>
<TcpText></TcpText>
<Alarm_clear_text></Alarm_clear_text>
</TCP>
<Syslog>
<IP_Addr></IP_Addr>
<Port>514</Port>
<SyslogText></SyslogText>
<Alarm_clear_text></Alarm_clear_text>
</Syslog>
<FTP>
<FtpLocalDataPort>AUTO</FtpLocalDataPort>
<FileName></FileName>
<FtpAlarmText></FtpAlarmText>
<Alarm_clear_text></Alarm_clear_text>
<Options>
<STORE>OFF</STORE>
<APPEND>ON</APPEND>
</Options>
</FTP>
</Alarm7>
<Alarm8>
<InputTrigger>
<Input_0><enable>OFF</enable><state>OFF</state></Input_0>
<Input_1><enable>OFF</enable><state>OFF</state></Input_1>
<Input_2><enable>OFF</enable><state>OFF</state></Input_2>
<Input_3><enable>OFF</enable><state>OFF</state></Input_3>
<Input_4><enable>OFF</enable><state>OFF</state></Input_4>
<Input_5><enable>OFF</enable><state>OFF</state></Input_5>
<Input_6><enable>OFF</enable><state>OFF</state></Input_6>
<Input_7><enable>OFF</enable><state>OFF</state></Input_7>
<Input_8><enable>OFF</enable><state>OFF</state></Input_8>
<Input_9><enable>OFF</enable><state>OFF</state></Input_9>
<Input_10><enable>OFF</enable><state>OFF</state></Input_10>
<Input_11><enable>OFF</enable><state>OFF</state></Input_11>
</InputTrigger>
<OutputTrigger>
<Output_0><enable>OFF</enable><state>OFF</state></Output_0>
<Output_1><enable>OFF</enable><state>OFF</state></Output_1>
<Output_2><enable>OFF</enable><state>OFF</state></Output_2>
<Output_3><enable>OFF</enable><state>OFF</state></Output_3>
<Output_4><enable>OFF</enable><state>OFF</state></Output_4>
<Output_5><enable>OFF</enable><state>OFF</state></Output_5>
<Output_6><enable>OFF</enable><state>OFF</state></Output_6>
<Output_7><enable>OFF</enable><state>OFF</state></Output_7>
<Output_8><enable>OFF</enable><state>OFF</state></Output_8>
<Output_9><enable>OFF</enable><state>OFF</state></Output_9>
<Output_10><enable>OFF</enable><state>OFF</state></Output_10>
<Output_11><enable>OFF</enable><state>OFF</state></Output_11>
</OutputTrigger>
<SystemTrigger>
<Load_Control>OFF</Load_Control>
<Interval_Timer>OFF</Interval_Timer>
<Cold_Start>OFF</Cold_Start>
<Warm_Start>OFF</Warm_Start>
</SystemTrigger>
<MaxCounterValue></MaxCounterValue>
<Interval></Interval>
<Timer_Cron></Timer_Cron>
<AlarmEnable>
<Mail_enable>OFF</Mail_enable>
<SNMP_Trap_enable>OFF</SNMP_Trap_enable>
<UDP_Client_enable>OFF</UDP_Client_enable>
<Send_special_alarm_to_pending_TCP_connections>OFF</Send_special_alarm_to_pending_TCP_connections>
<TCP_Client_enable>OFF</TCP_Client_enable>
<Syslog_Messages_enable>OFF</Syslog_Messages_enable>
<FTP_Client_enable>OFF</FTP_Client_enable>
</AlarmEnable>
<Mail>
<E-Mail-Addr></E-Mail-Addr>
<Subject></Subject>
<Mailtext></Mailtext>
<Alarm_clear_subject></Alarm_clear_subject>
<Alarm_clear_text></Alarm_clear_text>
</Mail>
<SNMP>
<Manager_IP></Manager_IP>
<TrapText></TrapText>
<Alarm_clear_text></Alarm_clear_text>
</SNMP>
<UDP>
<IP_Addr></IP_Addr>
<Port></Port>
<UdpText></UdpText>
<Alarm_clear_text></Alarm_clear_text>
</UDP>
<TCP>
<IP_Addr></IP_Addr>
<Port></Port>
<TcpText></TcpText>
<Alarm_clear_text></Alarm_clear_text>
</TCP>
<Syslog>
<IP_Addr></IP_Addr>
<Port>514</Port>
<SyslogText></SyslogText>
<Alarm_clear_text></Alarm_clear_text>
</Syslog>
<FTP>
<FtpLocalDataPort>AUTO</FtpLocalDataPort>
<FileName></FileName>
<FtpAlarmText></FtpAlarmText>
<Alarm_clear_text></Alarm_clear_text>
<Options>
<STORE>OFF</STORE>
<APPEND>ON</APPEND>
</Options>
</FTP>
</Alarm8>
<Alarm9>
<InputTrigger>
<Input_0><enable>OFF</enable><state>OFF</state></Input_0>
<Input_1><enable>OFF</enable><state>OFF</state></Input_1>
<Input_2><enable>OFF</enable><state>OFF</state></Input_2>
<Input_3><enable>OFF</enable><state>OFF</state></Input_3>
<Input_4><enable>OFF</enable><state>OFF</state></Input_4>
<Input_5><enable>OFF</enable><state>OFF</state></Input_5>
<Input_6><enable>OFF</enable><state>OFF</state></Input_6>
<Input_7><enable>OFF</enable><state>OFF</state></Input_7>
<Input_8><enable>OFF</enable><state>OFF</state></Input_8>
<Input_9><enable>OFF</enable><state>OFF</state></Input_9>
<Input_10><enable>OFF</enable><state>OFF</state></Input_10>
<Input_11><enable>OFF</enable><state>OFF</state></Input_11>
</InputTrigger>
<OutputTrigger>
<Output_0><enable>OFF</enable><state>OFF</state></Output_0>
<Output_1><enable>OFF</enable><state>OFF</state></Output_1>
<Output_2><enable>OFF</enable><state>OFF</state></Output_2>
<Output_3><enable>OFF</enable><state>OFF</state></Output_3>
<Output_4><enable>OFF</enable><state>OFF</state></Output_4>
<Output_5><enable>OFF</enable><state>OFF</state></Output_5>
<Output_6><enable>OFF</enable><state>OFF</state></Output_6>
<Output_7><enable>OFF</enable><state>OFF</state></Output_7>
<Output_8><enable>OFF</enable><state>OFF</state></Output_8>
<Output_9><enable>OFF</enable><state>OFF</state></Output_9>
<Output_10><enable>OFF</enable><state>OFF</state></Output_10>
<Output_11><enable>OFF</enable><state>OFF</state></Output_11>
</OutputTrigger>
<SystemTrigger>
<Load_Control>OFF</Load_Control>
<Interval_Timer>OFF</Interval_Timer>
<Cold_Start>OFF</Cold_Start>
<Warm_Start>OFF</Warm_Start>
</SystemTrigger>
<MaxCounterValue></MaxCounterValue>
<Interval></Interval>
<Timer_Cron></Timer_Cron>
<AlarmEnable>
<Mail_enable>OFF</Mail_enable>
<SNMP_Trap_enable>OFF</SNMP_Trap_enable>
<UDP_Client_enable>OFF</UDP_Client_enable>
<Send_special_alarm_to_pending_TCP_connections>OFF</Send_special_alarm_to_pending_TCP_connections>
<TCP_Client_enable>OFF</TCP_Client_enable>
<Syslog_Messages_enable>OFF</Syslog_Messages_enable>
<FTP_Client_enable>OFF</FTP_Client_enable>
</AlarmEnable>
<Mail>
<E-Mail-Addr></E-Mail-Addr>
<Subject></Subject>
<Mailtext></Mailtext>
<Alarm_clear_subject></Alarm_clear_subject>
<Alarm_clear_text></Alarm_clear_text>
</Mail>
<SNMP>
<Manager_IP></Manager_IP>
<TrapText></TrapText>
<Alarm_clear_text></Alarm_clear_text>
</SNMP>
<UDP>
<IP_Addr></IP_Addr>
<Port></Port>
<UdpText></UdpText>
<Alarm_clear_text></Alarm_clear_text>
</UDP>
<TCP>
<IP_Addr></IP_Addr>
<Port></Port>
<TcpText></TcpText>
<Alarm_clear_text></Alarm_clear_text>
</TCP>
<Syslog>
<IP_Addr></IP_Addr>
<Port>514</Port>
<SyslogText></SyslogText>
<Alarm_clear_text></Alarm_clear_text>
</Syslog>
<FTP>
<FtpLocalDataPort>AUTO</FtpLocalDataPort>
<FileName></FileName>
<FtpAlarmText></FtpAlarmText>
<Alarm_clear_text></Alarm_clear_text>
<Options>
<STORE>OFF</STORE>
<APPEND>ON</APPEND>
</Options>
</FTP>
</Alarm9>
<Alarm10>
<InputTrigger>
<Input_0><enable>OFF</enable><state>OFF</state></Input_0>
<Input_1><enable>OFF</enable><state>OFF</state></Input_1>
<Input_2><enable>OFF</enable><state>OFF</state></Input_2>
<Input_3><enable>OFF</enable><state>OFF</state></Input_3>
<Input_4><enable>OFF</enable><state>OFF</state></Input_4>
<Input_5><enable>OFF</enable><state>OFF</state></Input_5>
<Input_6><enable>OFF</enable><state>OFF</state></Input_6>
<Input_7><enable>OFF</enable><state>OFF</state></Input_7>
<Input_8><enable>OFF</enable><state>OFF</state></Input_8>
<Input_9><enable>OFF</enable><state>OFF</state></Input_9>
<Input_10><enable>OFF</enable><state>OFF</state></Input_10>
<Input_11><enable>OFF</enable><state>OFF</state></Input_11>
</InputTrigger>
<OutputTrigger>
<Output_0><enable>OFF</enable><state>OFF</state></Output_0>
<Output_1><enable>OFF</enable><state>OFF</state></Output_1>
<Output_2><enable>OFF</enable><state>OFF</state></Output_2>
<Output_3><enable>OFF</enable><state>OFF</state></Output_3>
<Output_4><enable>OFF</enable><state>OFF</state></Output_4>
<Output_5><enable>OFF</enable><state>OFF</state></Output_5>
<Output_6><enable>OFF</enable><state>OFF</state></Output_6>
<Output_7><enable>OFF</enable><state>OFF</state></Output_7>
<Output_8><enable>OFF</enable><state>OFF</state></Output_8>
<Output_9><enable>OFF</enable><state>OFF</state></Output_9>
<Output_10><enable>OFF</enable><state>OFF</state></Output_10>
<Output_11><enable>OFF</enable><state>OFF</state></Output_11>
</OutputTrigger>
<SystemTrigger>
<Load_Control>OFF</Load_Control>
<Interval_Timer>OFF</Interval_Timer>
<Cold_Start>OFF</Cold_Start>
<Warm_Start>OFF</Warm_Start>
</SystemTrigger>
<MaxCounterValue></MaxCounterValue>
<Interval></Interval>
<Timer_Cron></Timer_Cron>
<AlarmEnable>
<Mail_enable>OFF</Mail_enable>
<SNMP_Trap_enable>OFF</SNMP_Trap_enable>
<UDP_Client_enable>OFF</UDP_Client_enable>
<Send_special_alarm_to_pending_TCP_connections>OFF</Send_special_alarm_to_pending_TCP_connections>
<TCP_Client_enable>OFF</TCP_Client_enable>
<Syslog_Messages_enable>OFF</Syslog_Messages_enable>
<FTP_Client_enable>OFF</FTP_Client_enable>
</AlarmEnable>
<Mail>
<E-Mail-Addr></E-Mail-Addr>
<Subject></Subject>
<Mailtext></Mailtext>
<Alarm_clear_subject></Alarm_clear_subject>
<Alarm_clear_text></Alarm_clear_text>
</Mail>
<SNMP>
<Manager_IP></Manager_IP>
<TrapText></TrapText>
<Alarm_clear_text></Alarm_clear_text>
</SNMP>
<UDP>
<IP_Addr></IP_Addr>
<Port></Port>
<UdpText></UdpText>
<Alarm_clear_text></Alarm_clear_text>
</UDP>
<TCP>
<IP_Addr></IP_Addr>
<Port></Port>
<TcpText></TcpText>
<Alarm_clear_text></Alarm_clear_text>
</TCP>
<Syslog>
<IP_Addr></IP_Addr>
<Port>514</Port>
<SyslogText></SyslogText>
<Alarm_clear_text></Alarm_clear_text>
</Syslog>
<FTP>
<FtpLocalDataPort>AUTO</FtpLocalDataPort>
<FileName></FileName>
<FtpAlarmText></FtpAlarmText>
<Alarm_clear_text></Alarm_clear_text>
<Options>
<STORE>OFF</STORE>
<APPEND>ON</APPEND>
</Options>
</FTP>
</Alarm10>
<Alarm11>
<InputTrigger>
<Input_0><enable>OFF</enable><state>OFF</state></Input_0>
<Input_1><enable>OFF</enable><state>OFF</state></Input_1>
<Input_2><enable>OFF</enable><state>OFF</state></Input_2>
<Input_3><enable>OFF</enable><state>OFF</state></Input_3>
<Input_4><enable>OFF</enable><state>OFF</state></Input_4>
<Input_5><enable>OFF</enable><state>OFF</state></Input_5>
<Input_6><enable>OFF</enable><state>OFF</state></Input_6>
<Input_7><enable>OFF</enable><state>OFF</state></Input_7>
<Input_8><enable>OFF</enable><state>OFF</state></Input_8>
<Input_9><enable>OFF</enable><state>OFF</state></Input_9>
<Input_10><enable>OFF</enable><state>OFF</state></Input_10>
<Input_11><enable>OFF</enable><state>OFF</state></Input_11>
</InputTrigger>
<OutputTrigger>
<Output_0><enable>OFF</enable><state>OFF</state></Output_0>
<Output_1><enable>OFF</enable><state>OFF</state></Output_1>
<Output_2><enable>OFF</enable><state>OFF</state></Output_2>
<Output_3><enable>OFF</enable><state>OFF</state></Output_3>
<Output_4><enable>OFF</enable><state>OFF</state></Output_4>
<Output_5><enable>OFF</enable><state>OFF</state></Output_5>
<Output_6><enable>OFF</enable><state>OFF</state></Output_6>
<Output_7><enable>OFF</enable><state>OFF</state></Output_7>
<Output_8><enable>OFF</enable><state>OFF</state></Output_8>
<Output_9><enable>OFF</enable><state>OFF</state></Output_9>
<Output_10><enable>OFF</enable><state>OFF</state></Output_10>
<Output_11><enable>OFF</enable><state>OFF</state></Output_11>
</OutputTrigger>
<SystemTrigger>
<Load_Control>OFF</Load_Control>
<Interval_Timer>OFF</Interval_Timer>
<Cold_Start>OFF</Cold_Start>
<Warm_Start>OFF</Warm_Start>
</SystemTrigger>
<MaxCounterValue></MaxCounterValue>
<Interval></Interval>
<Timer_Cron></Timer_Cron>
<AlarmEnable>
<Mail_enable>OFF</Mail_enable>
<SNMP_Trap_enable>OFF</SNMP_Trap_enable>
<UDP_Client_enable>OFF</UDP_Client_enable>
<Send_special_alarm_to_pending_TCP_connections>OFF</Send_special_alarm_to_pending_TCP_connections>
<TCP_Client_enable>OFF</TCP_Client_enable>
<Syslog_Messages_enable>OFF</Syslog_Messages_enable>
<FTP_Client_enable>OFF</FTP_Client_enable>
</AlarmEnable>
<Mail>
<E-Mail-Addr></E-Mail-Addr>
<Subject></Subject>
<Mailtext></Mailtext>
<Alarm_clear_subject></Alarm_clear_subject>
<Alarm_clear_text></Alarm_clear_text>
</Mail>
<SNMP>
<Manager_IP></Manager_IP>
<TrapText></TrapText>
<Alarm_clear_text></Alarm_clear_text>
</SNMP>
<UDP>
<IP_Addr></IP_Addr>
<Port></Port>
<UdpText></UdpText>
<Alarm_clear_text></Alarm_clear_text>
</UDP>
<TCP>
<IP_Addr></IP_Addr>
<Port></Port>
<TcpText></TcpText>
<Alarm_clear_text></Alarm_clear_text>
</TCP>
<Syslog>
<IP_Addr></IP_Addr>
<Port>514</Port>
<SyslogText></SyslogText>
<Alarm_clear_text></Alarm_clear_text>
</Syslog>
<FTP>
<FtpLocalDataPort>AUTO</FtpLocalDataPort>
<FileName></FileName>
<FtpAlarmText></FtpAlarmText>
<Alarm_clear_text></Alarm_clear_text>
<Options>
<STORE>OFF</STORE>
<APPEND>ON</APPEND>
</Options>
</FTP>
</Alarm11>
<Alarm12>
<InputTrigger>
<Input_0><enable>OFF</enable><state>OFF</state></Input_0>
<Input_1><enable>OFF</enable><state>OFF</state></Input_1>
<Input_2><enable>OFF</enable><state>OFF</state></Input_2>
<Input_3><enable>OFF</enable><state>OFF</state></Input_3>
<Input_4><enable>OFF</enable><state>OFF</state></Input_4>
<Input_5><enable>OFF</enable><state>OFF</state></Input_5>
<Input_6><enable>OFF</enable><state>OFF</state></Input_6>
<Input_7><enable>OFF</enable><state>OFF</state></Input_7>
<Input_8><enable>OFF</enable><state>OFF</state></Input_8>
<Input_9><enable>OFF</enable><state>OFF</state></Input_9>
<Input_10><enable>OFF</enable><state>OFF</state></Input_10>
<Input_11><enable>OFF</enable><state>OFF</state></Input_11>
</InputTrigger>
<OutputTrigger>
<Output_0><enable>OFF</enable><state>OFF</state></Output_0>
<Output_1><enable>OFF</enable><state>OFF</state></Output_1>
<Output_2><enable>OFF</enable><state>OFF</state></Output_2>
<Output_3><enable>OFF</enable><state>OFF</state></Output_3>
<Output_4><enable>OFF</enable><state>OFF</state></Output_4>
<Output_5><enable>OFF</enable><state>OFF</state></Output_5>
<Output_6><enable>OFF</enable><state>OFF</state></Output_6>
<Output_7><enable>OFF</enable><state>OFF</state></Output_7>
<Output_8><enable>OFF</enable><state>OFF</state></Output_8>
<Output_9><enable>OFF</enable><state>OFF</state></Output_9>
<Output_10><enable>OFF</enable><state>OFF</state></Output_10>
<Output_11><enable>OFF</enable><state>OFF</state></Output_11>
</OutputTrigger>
<SystemTrigger>
<Load_Control>OFF</Load_Control>
<Interval_Timer>OFF</Interval_Timer>
<Cold_Start>OFF</Cold_Start>
<Warm_Start>OFF</Warm_Start>
</SystemTrigger>
<MaxCounterValue></MaxCounterValue>
<Interval></Interval>
<Timer_Cron></Timer_Cron>
<AlarmEnable>
<Mail_enable>OFF</Mail_enable>
<SNMP_Trap_enable>OFF</SNMP_Trap_enable>
<UDP_Client_enable>OFF</UDP_Client_enable>
<Send_special_alarm_to_pending_TCP_connections>OFF</Send_special_alarm_to_pending_TCP_connections>
<TCP_Client_enable>OFF</TCP_Client_enable>
<Syslog_Messages_enable>OFF</Syslog_Messages_enable>
<FTP_Client_enable>OFF</FTP_Client_enable>
</AlarmEnable>
<Mail>
<E-Mail-Addr></E-Mail-Addr>
<Subject></Subject>
<Mailtext></Mailtext>
<Alarm_clear_subject></Alarm_clear_subject>
<Alarm_clear_text></Alarm_clear_text>
</Mail>
<SNMP>
<Manager_IP></Manager_IP>
<TrapText></TrapText>
<Alarm_clear_text></Alarm_clear_text>
</SNMP>
<UDP>
<IP_Addr></IP_Addr>
<Port></Port>
<UdpText></UdpText>
<Alarm_clear_text></Alarm_clear_text>
</UDP>
<TCP>
<IP_Addr></IP_Addr>
<Port></Port>
<TcpText></TcpText>
<Alarm_clear_text></Alarm_clear_text>
</TCP>
<Syslog>
<IP_Addr></IP_Addr>
<Port>514</Port>
<SyslogText></SyslogText>
<Alarm_clear_text></Alarm_clear_text>
</Syslog>
<FTP>
<FtpLocalDataPort>AUTO</FtpLocalDataPort>
<FileName></FileName>
<FtpAlarmText></FtpAlarmText>
<Alarm_clear_text></Alarm_clear_text>
<Options>
<STORE>OFF</STORE>
<APPEND>ON</APPEND>
</Options>
</FTP>
</Alarm12>
</Alarm>
</Device>
<Ports>
<Inputs>
<Input0>
<Name>Input 0</Name>
<Text>Description Input 0</Text>
<Filter></Filter>
<InputMode>
<Short_Pulse_detection_enable>OFF</Short_Pulse_detection_enable>
<Change_detection_enable>OFF</Change_detection_enable>
<Clear_counter_on_read>OFF</Clear_counter_on_read>
<Bidirectional_counter_enable>OFF</Bidirectional_counter_enable>
</InputMode>
<Counter_Mode>
<PulsPolarity>
<negative>OFF</negative>
<positive>ON</positive>
</PulsPolarity>
<InactiveTimeout>1</InactiveTimeout>
</Counter_Mode>
</Input0>
<Input1>
<Name>Input 1</Name>
<Text>Description Input 1</Text>
<Filter></Filter>
<InputMode>
<Short_Pulse_detection_enable>OFF</Short_Pulse_detection_enable>
<Change_detection_enable>OFF</Change_detection_enable>
<Clear_counter_on_read>OFF</Clear_counter_on_read>
<Bidirectional_counter_enable>OFF</Bidirectional_counter_enable>
</InputMode>
<Counter_Mode>
<PulsPolarity>
<negative>OFF</negative>
<positive>ON</positive>
</PulsPolarity>
<InactiveTimeout>1</InactiveTimeout>
</Counter_Mode>
</Input1>
<Input2>
<Name>Input 2</Name>
<Text>Description Input 2</Text>
<Filter></Filter>
<InputMode>
<Short_Pulse_detection_enable>OFF</Short_Pulse_detection_enable>
<Change_detection_enable>OFF</Change_detection_enable>
<Clear_counter_on_read>OFF</Clear_counter_on_read>
<Bidirectional_counter_enable>OFF</Bidirectional_counter_enable>
</InputMode>
<Counter_Mode>
<PulsPolarity>
<negative>OFF</negative>
<positive>OFF</positive>
</PulsPolarity>
<InactiveTimeout></InactiveTimeout>
</Counter_Mode>
</Input2>
<Input3>
<Name>Input 3</Name>
<Text>Description Input 3</Text>
<Filter></Filter>
<InputMode>
<Short_Pulse_detection_enable>OFF</Short_Pulse_detection_enable>
<Change_detection_enable>OFF</Change_detection_enable>
<Clear_counter_on_read>OFF</Clear_counter_on_read>
<Bidirectional_counter_enable>OFF</Bidirectional_counter_enable>
</InputMode>
<Counter_Mode>
<PulsPolarity>
<negative>OFF</negative>
<positive>OFF</positive>
</PulsPolarity>
<InactiveTimeout></InactiveTimeout>
</Counter_Mode>
</Input3>
<Input4>
<Name>Input 4</Name>
<Text>Description Input 4</Text>
<Filter></Filter>
<InputMode>
<Change_detection_enable>OFF</Change_detection_enable>
<Clear_counter_on_read>OFF</Clear_counter_on_read>
<Bidirectional_counter_enable>OFF</Bidirectional_counter_enable>
</InputMode>
<Counter_Mode>
<PulsPolarity>
<negative>OFF</negative>
<positive>OFF</positive>
</PulsPolarity>
<InactiveTimeout></InactiveTimeout>
</Counter_Mode>
</Input4>
<Input5>
<Name>Input 5</Name>
<Text>Description Input 5</Text>
<Filter></Filter>
<InputMode>
<Change_detection_enable>OFF</Change_detection_enable>
<Clear_counter_on_read>OFF</Clear_counter_on_read>
<Bidirectional_counter_enable>OFF</Bidirectional_counter_enable>
</InputMode>
<Counter_Mode>
<PulsPolarity>
<negative>OFF</negative>
<positive>OFF</positive>
</PulsPolarity>
<InactiveTimeout></InactiveTimeout>
</Counter_Mode>
</Input5>
<Input6>
<Name>Input 6</Name>
<Text>Description Input 6</Text>
<Filter></Filter>
<InputMode>
<Change_detection_enable>OFF</Change_detection_enable>
<Clear_counter_on_read>OFF</Clear_counter_on_read>
<Bidirectional_counter_enable>OFF</Bidirectional_counter_enable>
</InputMode>
<Counter_Mode>
<PulsPolarity>
<negative>OFF</negative>
<positive>OFF</positive>
</PulsPolarity>
<InactiveTimeout></InactiveTimeout>
</Counter_Mode>
</Input6>
<Input7>
<Name>Input 7</Name>
<Text>Description Input 7</Text>
<Filter></Filter>
<InputMode>
<Change_detection_enable>OFF</Change_detection_enable>
<Clear_counter_on_read>OFF</Clear_counter_on_read>
<Bidirectional_counter_enable>OFF</Bidirectional_counter_enable>
</InputMode>
<Counter_Mode>
<PulsPolarity>
<negative>OFF</negative>
<positive>OFF</positive>
</PulsPolarity>
<InactiveTimeout></InactiveTimeout>
</Counter_Mode>
</Input7>
<Input8>
<Name>Input 8</Name>
<Text>Description Input 8</Text>
<Filter></Filter>
<InputMode>
<Change_detection_enable>OFF</Change_detection_enable>
<Clear_counter_on_read>OFF</Clear_counter_on_read>
<Bidirectional_counter_enable>OFF</Bidirectional_counter_enable>
</InputMode>
<Counter_Mode>
<PulsPolarity>
<negative>OFF</negative>
<positive>OFF</positive>
</PulsPolarity>
<InactiveTimeout></InactiveTimeout>
</Counter_Mode>
</Input8>
<Input9>
<Name>Input 9</Name>
<Text>Description Input 9</Text>
<Filter></Filter>
<InputMode>
<Change_detection_enable>OFF</Change_detection_enable>
<Clear_counter_on_read>OFF</Clear_counter_on_read>
<Bidirectional_counter_enable>OFF</Bidirectional_counter_enable>
</InputMode>
<Counter_Mode>
<PulsPolarity>
<negative>OFF</negative>
<positive>OFF</positive>
</PulsPolarity>
<InactiveTimeout></InactiveTimeout>
</Counter_Mode>
</Input9>
<Input10>
<Name>Input 10</Name>
<Text>Description Input 10</Text>
<Filter></Filter>
<InputMode>
<Change_detection_enable>OFF</Change_detection_enable>
<Clear_counter_on_read>OFF</Clear_counter_on_read>
<Bidirectional_counter_enable>OFF</Bidirectional_counter_enable>
</InputMode>
<Counter_Mode>
<PulsPolarity>
<negative>OFF</negative>
<positive>OFF</positive>
</PulsPolarity>
<InactiveTimeout></InactiveTimeout>
</Counter_Mode>
</Input10>
<Input11>
<Name>Input 11</Name>
<Text>Description Input 11</Text>
<Filter></Filter>
<InputMode>
<Change_detection_enable>OFF</Change_detection_enable>
<Clear_counter_on_read>OFF</Clear_counter_on_read>
<Bidirectional_counter_enable>OFF</Bidirectional_counter_enable>
</InputMode>
<Counter_Mode>
<PulsPolarity>
<negative>OFF</negative>
<positive>OFF</positive>
</PulsPolarity>
<InactiveTimeout></InactiveTimeout>
</Counter_Mode>
</Input11>
</Inputs>
<Outputs>
<Output0>
<Name>Output 0</Name>
<Text>Description Output 0</Text>
<GroupMode>
<_0_1_2_3_separated>ON</_0_1_2_3_separated>
<_0--1_2--3_parallel>OFF</_0--1_2--3_parallel>
<_0--1--2--3_parallel>OFF</_0--1--2--3_parallel>
</GroupMode>
<SafetyState>
<Safety_enable><enable>OFF</enable><state>OFF</state></Safety_enable>
</SafetyState>
<Logic>
<InputMask>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputMask>
<InputInverter>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputInverter>
<LogicFunc>
<AND>ON</AND>
<OR>OFF</OR>
</LogicFunc>
<OutputInverter>
<Output_Inverter>OFF</Output_Inverter>
</OutputInverter>
</Logic>
<Puls>
<Duration>5000</Duration>
<PulsPolarity>
<negative>OFF</negative>
<positive>ON</positive>
</PulsPolarity>
</Puls>
</Output0>
<Output1>
<Name>Output 1</Name>
<Text>Description Output 1</Text>
<GroupMode>
<_0_1_2_3_separated>ON</_0_1_2_3_separated>
<_0--1_2--3_parallel>OFF</_0--1_2--3_parallel>
<_0--1--2--3_parallel>OFF</_0--1--2--3_parallel>
</GroupMode>
<SafetyState>
<Safety_enable><enable>OFF</enable><state>OFF</state></Safety_enable>
</SafetyState>
<Logic>
<InputMask>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputMask>
<InputInverter>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputInverter>
<LogicFunc>
<AND>ON</AND>
<OR>OFF</OR>
</LogicFunc>
<OutputInverter>
<Output_Inverter>OFF</Output_Inverter>
</OutputInverter>
</Logic>
<Puls>
<Duration>2000</Duration>
<PulsPolarity>
<negative>OFF</negative>
<positive>ON</positive>
</PulsPolarity>
</Puls>
</Output1>
<Output2>
<Name>Output 2</Name>
<Text>Description Output 2</Text>
<GroupMode>
<_0_1_2_3_separated>ON</_0_1_2_3_separated>
<_0--1_2--3_parallel>OFF</_0--1_2--3_parallel>
<_0--1--2--3_parallel>OFF</_0--1--2--3_parallel>
</GroupMode>
<SafetyState>
<Safety_enable><enable>OFF</enable><state>OFF</state></Safety_enable>
</SafetyState>
<Logic>
<InputMask>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputMask>
<InputInverter>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputInverter>
<LogicFunc>
<AND>ON</AND>
<OR>OFF</OR>
</LogicFunc>
<OutputInverter>
<Output_Inverter>OFF</Output_Inverter>
</OutputInverter>
</Logic>
<Puls>
<Duration>1000</Duration>
<PulsPolarity>
<negative>OFF</negative>
<positive>ON</positive>
</PulsPolarity>
</Puls>
</Output2>
<Output3>
<Name>Output 3</Name>
<Text>Description Output 3</Text>
<GroupMode>
<_0_1_2_3_separated>ON</_0_1_2_3_separated>
<_0--1_2--3_parallel>OFF</_0--1_2--3_parallel>
<_0--1--2--3_parallel>OFF</_0--1--2--3_parallel>
</GroupMode>
<SafetyState>
<Safety_enable><enable>OFF</enable><state>OFF</state></Safety_enable>
</SafetyState>
<Logic>
<InputMask>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputMask>
<InputInverter>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputInverter>
<LogicFunc>
<AND>ON</AND>
<OR>OFF</OR>
</LogicFunc>
<OutputInverter>
<Output_Inverter>OFF</Output_Inverter>
</OutputInverter>
</Logic>
<Puls>
<Duration>1000</Duration>
<PulsPolarity>
<negative>OFF</negative>
<positive>ON</positive>
</PulsPolarity>
</Puls>
</Output3>
<Output4>
<Name>Output 4</Name>
<Text>Description Output 4</Text>
<GroupMode>
<_4_5_6_7_separated>ON</_4_5_6_7_separated>
<_4--5_6--7_parallel>OFF</_4--5_6--7_parallel>
<_4--5--6--7_parallel>OFF</_4--5--6--7_parallel>
</GroupMode>
<SafetyState>
<Safety_enable><enable>OFF</enable><state>OFF</state></Safety_enable>
</SafetyState>
<Logic>
<InputMask>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputMask>
<InputInverter>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputInverter>
<LogicFunc>
<AND>ON</AND>
<OR>OFF</OR>
</LogicFunc>
<OutputInverter>
<Output_Inverter>OFF</Output_Inverter>
</OutputInverter>
</Logic>
<Puls>
<Duration></Duration>
<PulsPolarity>
<negative>OFF</negative>
<positive>OFF</positive>
</PulsPolarity>
</Puls>
</Output4>
<Output5>
<Name>Output 5</Name>
<Text>Description Output 5</Text>
<GroupMode>
<_4_5_6_7_separated>ON</_4_5_6_7_separated>
<_4--5_6--7_parallel>OFF</_4--5_6--7_parallel>
<_4--5--6--7_parallel>OFF</_4--5--6--7_parallel>
</GroupMode>
<SafetyState>
<Safety_enable><enable>OFF</enable><state>OFF</state></Safety_enable>
</SafetyState>
<Logic>
<InputMask>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputMask>
<InputInverter>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputInverter>
<LogicFunc>
<AND>ON</AND>
<OR>OFF</OR>
</LogicFunc>
<OutputInverter>
<Output_Inverter>OFF</Output_Inverter>
</OutputInverter>
</Logic>
<Puls>
<Duration></Duration>
<PulsPolarity>
<negative>OFF</negative>
<positive>OFF</positive>
</PulsPolarity>
</Puls>
</Output5>
<Output6>
<Name>Output 6</Name>
<Text>Description Output 6</Text>
<GroupMode>
<_4_5_6_7_separated>ON</_4_5_6_7_separated>
<_4--5_6--7_parallel>OFF</_4--5_6--7_parallel>
<_4--5--6--7_parallel>OFF</_4--5--6--7_parallel>
</GroupMode>
<SafetyState>
<Safety_enable><enable>OFF</enable><state>OFF</state></Safety_enable>
</SafetyState>
<Logic>
<InputMask>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputMask>
<InputInverter>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputInverter>
<LogicFunc>
<AND>ON</AND>
<OR>OFF</OR>
</LogicFunc>
<OutputInverter>
<Output_Inverter>OFF</Output_Inverter>
</OutputInverter>
</Logic>
<Puls>
<Duration></Duration>
<PulsPolarity>
<negative>OFF</negative>
<positive>OFF</positive>
</PulsPolarity>
</Puls>
</Output6>
<Output7>
<Name>Output 7</Name>
<Text>Description Output 7</Text>
<GroupMode>
<_4_5_6_7_separated>ON</_4_5_6_7_separated>
<_4--5_6--7_parallel>OFF</_4--5_6--7_parallel>
<_4--5--6--7_parallel>OFF</_4--5--6--7_parallel>
</GroupMode>
<SafetyState>
<Safety_enable><enable>OFF</enable><state>OFF</state></Safety_enable>
</SafetyState>
<Logic>
<InputMask>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputMask>
<InputInverter>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputInverter>
<LogicFunc>
<AND>ON</AND>
<OR>OFF</OR>
</LogicFunc>
<OutputInverter>
<Output_Inverter>OFF</Output_Inverter>
</OutputInverter>
</Logic>
<Puls>
<Duration></Duration>
<PulsPolarity>
<negative>OFF</negative>
<positive>OFF</positive>
</PulsPolarity>
</Puls>
</Output7>
<Output8>
<Name>Output 8</Name>
<Text>Description Output 8</Text>
<GroupMode>
<_8_9_10_11_separated>ON</_8_9_10_11_separated>
<_8--9_10--11_parallel>OFF</_8--9_10--11_parallel>
<_8--9--10--11_parallel>OFF</_8--9--10--11_parallel>
</GroupMode>
<SafetyState>
<Safety_enable><enable>OFF</enable><state>OFF</state></Safety_enable>
</SafetyState>
<Logic>
<InputMask>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputMask>
<InputInverter>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputInverter>
<LogicFunc>
<AND>ON</AND>
<OR>OFF</OR>
</LogicFunc>
<OutputInverter>
<Output_Inverter>OFF</Output_Inverter>
</OutputInverter>
</Logic>
<Puls>
<Duration></Duration>
<PulsPolarity>
<negative>OFF</negative>
<positive>OFF</positive>
</PulsPolarity>
</Puls>
</Output8>
<Output9>
<Name>Output 9</Name>
<Text>Description Output 9</Text>
<GroupMode>
<_8_9_10_11_separated>ON</_8_9_10_11_separated>
<_8--9_10--11_parallel>OFF</_8--9_10--11_parallel>
<_8--9--10--11_parallel>OFF</_8--9--10--11_parallel>
</GroupMode>
<SafetyState>
<Safety_enable><enable>OFF</enable><state>OFF</state></Safety_enable>
</SafetyState>
<Logic>
<InputMask>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputMask>
<InputInverter>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputInverter>
<LogicFunc>
<AND>ON</AND>
<OR>OFF</OR>
</LogicFunc>
<OutputInverter>
<Output_Inverter>OFF</Output_Inverter>
</OutputInverter>
</Logic>
<Puls>
<Duration></Duration>
<PulsPolarity>
<negative>OFF</negative>
<positive>OFF</positive>
</PulsPolarity>
</Puls>
</Output9>
<Output10>
<Name>Output 10</Name>
<Text>Description Output 10</Text>
<GroupMode>
<_8_9_10_11_separated>ON</_8_9_10_11_separated>
<_8--9_10--11_parallel>OFF</_8--9_10--11_parallel>
<_8--9--10--11_parallel>OFF</_8--9--10--11_parallel>
</GroupMode>
<SafetyState>
<Safety_enable><enable>OFF</enable><state>OFF</state></Safety_enable>
</SafetyState>
<Logic>
<InputMask>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputMask>
<InputInverter>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputInverter>
<LogicFunc>
<AND>ON</AND>
<OR>OFF</OR>
</LogicFunc>
<OutputInverter>
<Output_Inverter>OFF</Output_Inverter>
</OutputInverter>
</Logic>
<Puls>
<Duration></Duration>
<PulsPolarity>
<negative>OFF</negative>
<positive>OFF</positive>
</PulsPolarity>
</Puls>
</Output10>
<Output11>
<Name>Output 11</Name>
<Text>Description Output 11</Text>
<GroupMode>
<_8_9_10_11_separated>ON</_8_9_10_11_separated>
<_8--9_10--11_parallel>OFF</_8--9_10--11_parallel>
<_8--9--10--11_parallel>OFF</_8--9--10--11_parallel>
</GroupMode>
<SafetyState>
<Safety_enable><enable>OFF</enable><state>OFF</state></Safety_enable>
</SafetyState>
<Logic>
<InputMask>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputMask>
<InputInverter>
<Input_0>OFF</Input_0>
<Input_1>OFF</Input_1>
<Input_2>OFF</Input_2>
<Input_3>OFF</Input_3>
<Input_4>OFF</Input_4>
<Input_5>OFF</Input_5>
<Input_6>OFF</Input_6>
<Input_7>OFF</Input_7>
<Input_8>OFF</Input_8>
<Input_9>OFF</Input_9>
<Input_10>OFF</Input_10>
<Input_11>OFF</Input_11>
</InputInverter>
<LogicFunc>
<AND>ON</AND>
<OR>OFF</OR>
</LogicFunc>
<OutputInverter>
<Output_Inverter>OFF</Output_Inverter>
</OutputInverter>
</Logic>
<Puls>
<Duration></Duration>
<PulsPolarity>
<negative>OFF</negative>
<positive>OFF</positive>
</PulsPolarity>
</Puls>
</Output11>
</Outputs>
</Ports>
<Manufacturer>
<Name>Wiesemann & Theis GmbH</Name>
<Address>Porschstr. 12<br>
42279 Wuppertal<br>
Germany</Address>
<Support_Hotline>+49-(0)202-2680-0</Support_Hotline>
<Internet>www.wut.de</Internet>
<DeviceTyp>Web-IO Digital 12xIn, 12xOut</DeviceTyp>
<DeviceNo>#57630 TB 900571</DeviceNo>
<Logo>logo.gif</Logo>
</Manufacturer>
</Config>
</io-Digital12x12.3>