Live Input Properties: Type SDI

• Video System: Either the required resolution or Auto to use the configured output resolution. In case of a video wall setup (full screen or custom resolution), Auto falls back to 1080i and must be reconfigured if a different resolution is required.

• Colorimetry: This setting is only relevant for HDR workflows and available for resolutions from 1080p upwards. Available options are:

  • ITUR_BT_709

  • ITUR_BT_2020

  • ITUR_BT_2100_HLG

• Bits per channel: Defines how many bits per channel are processed for an input.

  Note: Bits per channel is not supported on SD channels.

• Video Settings

  • Contains Alpha: Enables alpha for this input. Only available on connectors that have an associated alpha connector.

  • Delay DVE: Sets DVE Delay of video when used as DVE.

  • Delay Texture: Sets texture Delay of video when used as Texture.

    Note: Setting the texture delay of progressive inputs to 1 frame has a performance impact that scales with the aggregate bandwidth of the input signals.

• Audio Settings

  • Enable Audio: Toggles audio for this channel. When set to Inactive, audio is disabled. Default value is Active.

  • Audio Channels: Defines the number of Audio Tracks to be used on the channel. The number of available track configurations is dependent on the Video hardware being used.

  • Delay DVE: Sets the number of frames the audio clip should be delayed in DVE mode before it can be mixed to the output. Default value is 4.

  • Delay Texture: Sets the number of frames the audio clip should be delayed in texture mode before it can be mixed to the output. Default value is 4.

• VBI Settings

  • Enable VBI: Defines whether VBI should be used for this channel. Set to Active or Inactive. Default mode is Inactive.

  • Delay DVE: Sets the number of frames VBI should be delayed before the clip can be used in DVE mode. Default value is 0 (Off).

  • Delay Texture: Sets the number of frames VBI should be delayed before the clip can be used in texture mode. Default value is 1.

• Source Connector: Replaces Map To Viz Channel and assigns the selected physical connector to that channel.

• Multiconnector Mode: Defines which type of multiconnector mode is used when performing quad UHD or "None" in case a 12G channel is in use (A, B, C, D). Additionally, only channels A, E and I are allowed by Viz Engine to change this mode, although channels E and I can have only 2SI or Square Division set. Default value is None for channel A and 2SI for E and I. Otherwise this control disabled. Only available when using an X.mio5 12G card and Video System is configured to an UHD resolution.

• Connector Settings

  • 3G Level B: Toggles the Level B on that connector if configured to 1080p or higher.

  • Allow Super Black: Toggles super black on this connector.

  • Allow Super White: Toggles super white on this connector.

  • Chroma Clipping: Toggles chroma clipping on this connector.

Live Input Properties: Type IP

• Video System: Either the required resolution or Auto to use the configured output resolution. In case of a video wall setup (full screen or custom resolution), Auto falls back to 1080i and must be reconfigured if a different resolution is required.

• Colorimetry: This setting is only relevant for HDR workflows and available for resolutions from 1080p upwards. Available options are:
  

  • ITUR_BT_709

  • ITUR_BT_2020

  • ITUR_BT_2100_HLG

• Bits per channel: Defines how many bits per channel are processed for an input. This is not supported on SD channels!

• Video Settings

  • Contains Alpha: Enables alpha for this input. Only available on connectors that have an associated alpha connector.

  • Delay DVE: Sets DVE Delay of video when used as DVE.

  • Delay Texture: Sets texture Delay of video when used as Texture.

    Note: Setting the texture delay of progressive inputs to 1 frame has a performance impact that scales with the aggregate bandwidth of the input signals.

• Audio Settings

  • Enable Audio: Toggles audio for this channel. When set to Inactive, audio is disabled. Default value is Active.

  • Audio Channels: Defines the number of Audio Tracks to be used on the channel. The number of available track configurations is dependent on the used Video hardware.

  • Delay DVE: Sets the number of frames the audio clip should be delayed in DVE mode before it can be mixed to the output. Default value is 4.

  • Delay Texture: Sets the number of frames the audio clip should be delayed in texture mode before it can be mixed to the output. Default value is 4.

• VBI Settings

  • Enable VBI: Defines whether VBI should be used for this channel. Set to Active or Inactive. Default mode is Inactive.

  • Delay DVE: Sets the number of frames VBI should be delayed, before the clip can be used, in DVE mode. Default value is 0 (Off).

  • Delay Texture: Sets the number of frames VBI should be delayed, before the clip can be used, in texture mode. Default value is 1.

• Source Connector: Replaces Map To Viz Channel and assigns the selected physical connector to that channel.

• Connector Settings

  • Allow Super Black: Toggles super black on this connector.

  • Allow Super White: Toggles super white on this connector.

  • Chroma Clipping: Toggles chroma clipping on this connector.

Live Input Properties: Type STREAM

• Video System: Either the required resolution or Auto to use the configured output resolution. In case of a video wall setup (full screen or custom resolution), Auto falls back to 1080i and must be reconfigured if a different resolution is required.

• Stream Settings

  • Enable Audio: If audio should be received or not

  • Url: URL of the stream in the format [protocol]://@ip:port. Possible protocol values are RTP, RTSP, RTMP, UDP, and SRT (for example, udp://@239.0.1.10:50202).

• Nic Address: NIC that is receiving the stream.
  
  RTSP and RTMP Settings:

• Src Udp Port: Source port only used for RTSP. Must be different for every active RTPS stream.
  
  SRT Settings:

• Connection Mode

• Remote URL and Passphrase

• Seconds to wait until a connection approach is being aborted and the Latency in Ms.

• Access Unit Aligned Input: If true, the user application provides the decoder with data that is aligned on an access unit. Use if there are artifacts in input due to Open GOP.

• Disable AV Sync: Disables AV Sync. When there is no audio in the stream, this must be manually set to true.

• Use SW Decoding: Forces the use of Software Decoding even if M264 is available.

Live Input Properties: Type NDI

• Video System: Either the required resolution or Auto to use the configured output resolution. In case of a video wall setup (full screen or custom resolution), Auto falls back to 1080i and must be reconfigured if a different resolution is required.

• Ndi Settings

  • Enable Audio: If audio should be received or not

  • Source: The URL of the NDI source to be used.

Live Input Properties: Type SHM - SMURF

• Video System: Either the required resolution or Auto to use the configured output resolution. In case of a video wall setup (full screen or custom resolution), Auto falls back to 1080i and must be reconfigured if a different resolution is required.

• Shm Settings

  • Enable Audio: If audio should be received or not

  • Shm Key: Shared Memory Key to be accessed.

See Also

• Matrox Stream