Setup

Viz Pilot Edge follows the Pilot Data Server installation and opens as a web application in a browser.

The URL to access Viz Pilot Edge is: 

http://pds-host-name:8177/app/pilotedge/PilotEdge.html

This section covers configuration related to Viz Pilot Edge:

System Requirements

Hardware

There are no known hardware limitations for Viz Pilot Edge, other than requirements stipulated by newsroom systems that are hosting the client.

Software

If you are running Viz Pilot Edge inside a browser, the following minimum requirements apply:

  • Microsoft Internet Explorer 11 +

  • Chrome 64 +

  • Safari 11.0 +

Installing Crop Service

To install Crop Service, run the Crop Service installer: VizrtPilotCropService-x64-x.y.msi

Pilot Edge's crop tool, Image Editor, is dependent on Crop Service. In order to use Crop Service, the Pilot Data Server must be installed, see the Pilot Data Server Installation section in the Viz Pilot User Guide. To simplify configuration it's recommended to install Crop Service and Pilot Data Server on the same machine. If they're installed on different machines, see Configuring the Connection from Crop Service to Pilot Data Server.

For more details on Crop Service, see the Crop Service section in the Viz Pilot User Guide.

Setting Database Parameters for Crop Service

Database Parameters in the Pilot Data Server must be configured for Crop Service:

  1. See To access the Pilot Data Server Web Interface in the Pilot Data Server section of the Pilot User Guide.

  2. Click the Settings link.

  3. Select crop_service_uri, and add the parameter for the machine on which you installed the Pilot Data Server:

    •http://<cropservicehostname>:8178 /

  4. Optional: Set the croptool_max_image_area to adjust the maximum size of a cropped image that will be served by the Pilot Data Server.
    If the image size (*) is larger than croptool_max_image_area, then the image will be resized, while still respecting the aspect ratio of the crop. The maximum image size applies even if no cropping is done.
    * Image size = image width x height in pixels.

  5. Click Save

Configuring the Connection from Crop Service to Pilot Data Server

Note:

If Crop Service is installed on the same machine as the Pilot Data Server, you can skip the steps below (Crop Service has then already been configured).

If Crop Service is installed on a different machine, configure the connection to Pilot Data Server as follows:

  1. In Windows, open the Services dialogue and stop Crop Service.

  2. Open the Crop Service configuration file. This must be done "As Administrator".
    For example, run Notepad (as administrator), and in Notepad open the config file:
    C:\Program Files\Vizrt\Crop Service\CropServiceHost.exe.config

  3. In the config file, find the following section:

    <userSettings>
    <CropServiceHost.Properties.Settings>
    <setting name="PilotDataServerUri" serializeAs="String">
    <value/>
    </setting>
    </CropServiceHost.Properties.Settings>
    </userSettings>

  4. Replace <value/> with
    <value>http://YOUR\-PDS\-HOST\-HERE:8177</value>
    and save your changes.

  5. Start Crop Service.

  6. Verify that the configuration is correct by viewing the log file at
    C:\ProgramData\Vizrt\Logs\CropService\cropservice.log
    If you see an error similar to:
    ERROR: Failed to get payload from: http://localhost:8177/vcp/parameters, Error: Unable to connect to the remote server
    the configuration is incorrect, and you must repeat steps 1-6 above.

Database Settings and URL Parameters

You can modify the behavior of Pilot Edge for all clients by editing the database settings in Pilot Data Server, or per client by adding URL parameters.

Pilot Data Server setting

Description

ax_disable_overlay_saving

Disables saving of overlay timelines for clip assets that have an overlay_timeline link.

ax_dont_fetch_thumbnails

Turns off the possibility to show thumbnails in the element list.

ax_hide_dataelements

Hides the data element list if set to true.

preview_server_uri

Base URL to the Preview Server to be used when requesting preview images for the graphics.

shared_curious_server

Viz World Server IP or hostname for the maps workflow. If you add multiple hostnames, Pilot Edge will utilize the first one on the list.

video_mode

Video mode for channel. PAL or NTSC.

URL parameter

Description

autorefreshpreview= [true/false]

Disables auto-refresh of graphic preview if set to false.

candeletepilotelements=[true/false]

Allows the user to delete data elements from the database if set to true.

maps=[hostname]

Overrides the setting shared_curious_server defined in the Pilot Data Server.

preview=[hostname]

Overrides the setting preview_server_uri defined in the Pilot Data Server.

showpilotelements=[true/false]

Hides the data element list if set to false. Overrides the setting ax_hide_dataelements defined in the Pilot Data Server.

Installing Viz Pilot Edge for ActiveX Based Systems

Some newsroom systems support plugin applications, but not HTML plugin applications like Viz Pilot Edge. For these systems, Show Edge, an HTML wrapper for systems that only support ActiveX based plugins, must be installed.

Run the Show Edge installer:

  • The Show Edge installer is in the same location as Viz Pilot Edge. Following the location of Viz Pilot Edge at the top of this page, the Show Edge installer is available at: 

    http://pds-host-name:8177/app/pilotedge/ShowEdgeInstaller.exe

    - Run the Vizrt_Show_Edge-x.y.exe file on the client machine.

    - For remote installation on multiple machines, the installation file that includes the --msi parameter must be used. This will create a sub-folder containing the .msi file. In the command line, run: 

    Vizrt_Show_Edge-x.y.exe --msi

  • The URL to access Viz Pilot Edge is required during installation.

    - Enter the URL in the installer window that appears after running the .exe installer

    - For the MSI installation set the Viz Pilot Edge URL using the PE_URL property: 

    msiexec.exe /i ShowEdge.msi "PE_URL=http://pds-host-name:8177/pilotedge"

  • If the MSI installation is used, the default install directory can be overridden with the parameter INSTALLDIR: 

    msiexec.exe /i ShowEdge.msi "PE_URL=http://pds-host-name:8177/pilotedge" "INSTALLDIR=mypath"

  • Opening the Show Pilot Edge application from the start menu opens the configured URL in a browser window.

  • The URL can be changed by doing one of the following:

    - For the .exe installation, first uninstall and then re-install Show Edge. Enter a different URL in the installation window

    - For the MSI installation, it's not necessary to uninstall to change the URL. Simply run with a different URL in the command line: 

    msiexec.exe /i ShowEdge.msi "PE_URL=change_the_URL"

    - Run ShowEdge.exe with the desired URL parameter in the command line

Note

To access help in the command window, run: ShowEdge.exe help

Mist Setup

It's recommended to install Mist and let that serve out all the products if you want to simplify resource sharing with other products like Template Builder and Viz Story or if you need HTTPS support. Mist also ensures that atom feeds that don't include proper CORS headers such as Flickr, function correctly. Mist is not installed by default and is optional.

The URL to access Pilot Edge if served out by Mist is: 

http://hostname/pilotedge/

Connecting to Viz One Using Internet Explorer

In order to use Viz One as a search provider in Pilot Edge when running in Internet Explorer, you may need to change the setting below to enter the Viz One credentials:

In Internet Explorer: Go to Tools → Internet Options → Security → Custom level ...

Go to Access data sources across domains under Miscellaneous and click Enable. Press OK and reload Pilot Edge.

images/download/attachments/54027711/allowCrossDomainInIE.png